vc4-drm soc:gpu: [drm] *ERROR* Failed to allocate binner memory: -12

[vk7hse]

crashdump_fullpageos15_.txt

Fresh install on a raspberry pi2. getting the following warnings in dmesg... please see attached text file with dmesg output at the time of the crash...

Cheers

[guysoft]

@vk7hse try the non-gpu variant, might solve it.

[vk7hse]

@vk7hse try the non-gpu variant, might solve it.

Ah, I was using the Raspberry Pi Imager and it only gave the option to use a nightly build and or a stable, it made no mention of accelerated vs non accelerated. Think we can park this one and write it off as user error!

Cheers

[guysoft]

No worries, update if it worked. I am always asking myself if to maintain the non-gpu one. And confirmation that it works for people helps me know I should keep it!

[vk7hse]

I'll be re imaging that pi2 tomorrow morning, and will let you know how it goes... Cheers

…

On Mon, 1 Sept 2025, 21:49 Guy Sheffer, ***@***.***> wrote: *guysoft* left a comment (guysoft/FullPageOS#670) <#670 (comment)> No worries, update if it worked. I am always asking myself if to maintain the non-gpu one. And confirmation that it works for people helps me know I should keep it! — Reply to this email directly, view it on GitHub <#670 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AACRUDTFFNM6PWRSYGILNED3QQXC7AVCNFSM6AAAAACFJFYGDOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTENBSGA3DIMRRGE> . You are receiving this because you modified the open/close state.Message ID: ***@***.***>

[vk7hse]

After the reimage to the non accelerated release all is working well.

I'm still seeing that error message in demesg but there's not been a crash like it did on the version including acceleration for the graphics output.

Cheers

[guysoft]

Thats good to know, worth adding a node in the doc that rpi2 should use the non accelerated image.

Also, this likely means that the error is not related